Shenzhen TFNEW Technology Co., Ltd. is one of the leading manufacturers and suppliers of switch network 24 port in China. We are committed to providing high quality customized service to global clients. Welcome to wholesale bulk cheap switch network 24 port from our factory.
Product Content
Why Build Headroom Into the Edge
Most 24-port switches are dimensioned for the ports they have. This one is dimensioned for the ports that will be connected to it next year - and the year after. 672 Gbps switching capacity provides 3x the bandwidth needed for 24 Gigabit ports at line rate. That surplus is not waste; it is room to grow.
When 10G Uplinks Are Not Optional
Four 10G SFP+ ports provide 40 Gbps of uplink capacity. Connected to a core switch or distribution layer, these links carry aggregated traffic from all 24 access ports without bottlenecking - even when every access port is running at full Gigabit speed simultaneously.
Forwarding That Keeps Up
309 Mpps forwarding rate. At full 24-port Gigabit load, the switch processes every packet at line rate with substantial headroom remaining. Burst traffic - the kind that happens when everyone opens a large file at once - does not cause queue buildup. The forwarding engine has already cleared the backlog before the next burst arrives.
Ring Protection for the Edge
Deterministic ring recovery in under 50 milliseconds. Ring topologies make sense at the edge - connecting IDF closets around a building floor, linking roadside cabinets along a transit corridor. Where spanning tree would take seconds to reconverge, ring protection takes milliseconds. The difference is a brief flicker versus a helpdesk flood.
Who Specs These
Network engineers who dimension for peak, not average. Industrial system integrators who need deterministic failover. Enterprise teams planning a 10G core migration who want edge switches ready for it.
Product Features
672 Gbps: Headroom by Design
A 24-port Gigabit switch needs 48 Gbps of switching capacity for full-duplex line rate. This platform provides 672 Gbps - 14x the minimum. That margin means the switch fabric never becomes the bottleneck, regardless of how traffic patterns evolve over time.
01
4 10G SFP+ Uplinks, No Oversubscription
Four 10G ports aggregate 24 Gigabit access ports at a 1.67:1 oversubscription ratio under worst-case load - well within comfortable operating range. In practice, with typical traffic patterns, the uplinks run uncongested throughout the day.
02
309 Mpps: Forwarding for Bursty Traffic
Real network traffic is not a steady stream - it bursts. 309 Mpps forwarding capacity absorbs bursts that would overwhelm a switch dimensioned for average load. Buffers stay shallow. Latency stays low. Applications stay responsive.
03
Industrial Ring Protection at Enterprise Edge
Sub-50 ms ring failover guarantees zero-packet-loss recovery - the same mechanism used in substation automation and rail signaling, now protecting enterprise edge closets. Fiber cut between floors? The ring heals before the phone rings.
04
ASIC QoS: Set It and Forget It
Hardware-based traffic classification operates at line rate with zero CPU involvement. Configure the policy once; the ASIC enforces it forever. Voice traffic gets priority over file transfers. Surveillance streams get guaranteed bandwidth. No tuning required.
05
Product Parameters
|
Parameter |
Specification |
|
Ports |
24 x 10/100/1000M RJ45, 4 x 10G SFP+ |
|
Switching Capacity |
672 Gbps / 6.72 Tbps |
|
Forwarding Rate |
171 / 309 Mpps |
|
Layer Support |
L2 / L3 Routing |
|
Ring Protection |
< 50 ms Failover |
|
QoS |
VLAN / MAC / IP / Protocol / Priority Classification, Priority Remarking |
|
Security |
Hierarchical CLI, Hardware Packet Protection |
|
Switch Chip |
High-Performance ASIC |
|
Form Factor |
1U Rackmount |
|
Warranty |
1 Year (Extendable) |
|
MOQ |
1 Unit |
|
OEM / ODM |
Supported |
Product Advantages
Headroom That Outlasts the Hardware
672 Gbps in a 24-port switch means the switching fabric will not be the reason you replace this device. When access ports upgrade to 2.5G or 5G, the backplane is already ready. One less thing to budget for in the next refresh cycle.
10G-Ready Edge Today
10G SFP+ uplinks connect to 10G core infrastructure without media converters or inline devices. When the core migration to 10G happens, the edge is already compatible - no forklift upgrade needed.
Burst-Proof Forwarding
309 Mpps ensures traffic bursts clear before the next one arrives. File server access during morning login storms. Backup jobs launching simultaneously. Video conference spikes at the top of the hour. The switch handles it; the users do not notice it.
Custom branding and configuration at competitive MOQ for integrators building headroom-conscious portfolios.
Application Scenarios
Enterprise Edge with 10G Uplinks
Deployed in IDF closets where 24 Gigabit ports serve a floor of users and 10G uplinks connect to a building distribution switch. The switching headroom ensures that peak-hour traffic from all 24 users never congests the uplink.
Gaming and Esports Venue Edge
Low-latency L3 switching for gaming cafes and esports venues where frame delivery timing is the difference between winning and losing. Ring protection keeps the tournament running even if an infrastructure fault occurs mid-match.
Transportation Station Networking
Connects ticket kiosks, information displays, and surveillance cameras in transit stations. Ring topology along the platform ensures a single cable fault does not take the station offline during operating hours.
Certification
CE, FCC
Hot Tags: switch network 24 port, China switch network 24 port suppliers, 1gbps switch 24 port, Core Layer Switch, Poe Switch 24 Port Managed, sw poe 24 port, switch 10 gbe, switch 48ports
