Small Business Wifi Access Point

Send Inquiry
Small Business Wifi Access Point
Details
The TENEW Small Business WiFi Access Point (TFD3C) is a dual-band indoor wireless access point built on the 802.11ac Wave 2 standard. It delivers a combined wireless rate of up to 1,300 Mbps across 2.4 GHz and 5 GHz bands, with two spatial streams per band supporting concurrent access for approximately 100 active devices. Covering up to 500 square meters per unit, the TFD3C is designed for small offices, retail spaces, and branch locations that need reliable WiFi without complex controller infrastructure. It supports Mesh networking, Cloud AC management, and PoE power supply for clean, single-cable deployment.
Category
Wireless-Access-Points
Share to
Description

Shenzhen TFNEW Technology Co., Ltd. is one of the leading manufacturers and suppliers of small business wifi access point in China. We are committed to providing high quality customized service to global clients. Welcome to wholesale bulk cheap small business wifi access point from our factory.

 

Product Overview

 

The TFD3C is positioned as a high-performance indoor access point for small to medium business environments. It operates on IEEE 802.11ac Wave 2 with a dual-band 2-stream configuration - 2×2 MIMO on 2.4 GHz (300 Mbps) and 2×2 MIMO on 5 GHz (867 Mbps) - delivering a combined rate of 1,167 Mbps (rated at 1,300 Mbps peak). This provides enough aggregate throughput to sustain video conferencing, file transfers, and general browsing for up to 100 simultaneous wireless clients.

 

Coverage extends to approximately 500 square meters in typical office environments, making the TFD3C suitable as a single-AP solution for small offices or as part of a multi-AP Mesh network for larger floors. The internal omni-directional antennas are optimised for wide, uniform coverage with minimal dead zones.

product-800-800

From a deployment perspective, the TFD3C offers three operating modes: Route mode (with built-in DHCP server and NAT for small networks that lack a dedicated router), AP mode (bridge mode connecting to an existing LAN), and Mesh mode (wireless backhaul to another TENEW AP where running Ethernet is impractical). It also supports Cloud AC management, allowing multiple APs to be configured and monitored from a centralised cloud dashboard. The TENEW mobile app provides both local setup via Bluetooth wizard and remote management for on-the-go administration.

 

Security is comprehensive: WPA/WPA2-Personal and Enterprise encryption, 802.1X authentication, MAC address filtering, user isolation (layer 2 and per-SSID), and SSID-to-VLAN binding. The captive portal supports one-click login, account-password, SMS verification, and voucher-based guest access. AI-driven QoS identifies application traffic types and maps them to appropriate air-interface queues, prioritising business-critical applications over recreational traffic. Load balancing operates across four dimensions - traffic volume, user count, frequency band, and air-interface load - distributing clients efficiently across multiple APs in a deployment.

product-800-800

 

Product Features

 

802.11ac Wave 2 Dual-Band, 2-Stream Design

The TFD3C runs 2×2 MIMO on both 2.4 GHz and 5 GHz bands, delivering 300 Mbps and 867 Mbps respectively. MU-MIMO support allows simultaneous downlink transmissions to compatible clients, reducing queuing delays during busy periods.

Mesh Networking Support

When wired backhaul is unavailable, the TFD3C can form a wireless Mesh network with other TENEW APs. This extends coverage to areas where pulling Ethernet cable is difficult or cost-prohibitive, such as heritage buildings or temporary event spaces.

Three Operating Modes

Route mode provides built-in DHCP and NAT for small offices without a dedicated router. AP mode bridges to an existing wired network. Mesh mode enables wireless uplink to a parent AP. Each mode is selected through the management interface without firmware changes.

Cloud AC and Mobile App Management

Multiple TFD3C units can be centrally managed through the TENEW Cloud AC platform. The TENEW mobile app adds Bluetooth-assisted local setup - walk up to the AP, pair via Bluetooth, and configure SSIDs and security policies without a laptop. Remote management keeps administrators connected even when off-site.

AI QoS and Multi-Dimensional Load Balancing

Application-level traffic identification maps flows to priority queues on the air interface, ensuring video conferencing and VoIP maintain consistent latency. Load balancing distributes clients by traffic volume, user count, band selection, and air-interface occupancy across the AP cluster.

Enterprise-Grade Security and Guest Access

WPA3-ready encryption, 802.1X RADIUS integration, user isolation, and SSID-to-VLAN binding protect internal network traffic. Guest access is handled through a branded captive portal with one-click, account-password, SMS, or voucher authentication - no app downloads required.

 

Product Parameters

 

Specification

Details

Product Model

TFD3C

Product Category

Indoor Access Point

Wi-Fi Standard

IEEE 802.11a/b/g/n/ac Wave 2

Operating Bands

2.4 GHz, 5 GHz

Antenna Configuration

2.4 GHz: 2×2 MIMO; 5 GHz: 2×2 MIMO

Wireless Rate

2.4 GHz: 300 Mbps (2×2 11n)
5 GHz: 867 Mbps (2×2 11ac)

Combined Rate

Up to 1,300 Mbps (rated peak)

Antenna Type

Internal omni-directional

MU-MIMO

Supported (Downlink)

Mesh Networking

Supported

Ethernet Ports

2× Gigabit RJ45 (LAN/PoE In + LAN/PoE Out)

PoE

IEEE 802.3af (DC 48V)

Power Consumption

< 11.5 W

Dimensions

234.4 mm × 234.4 mm × 40 mm

Weight

Approx. 480 g

Installation

Ceiling mount / Wall mount / Desktop

Coverage Area

Up to 500 m² (typical office)

Recommended Concurrent Clients

~100 (video streaming workload)

Security

Open / WEP / WPA-PSK / WPA2-PSK / WPA3 / WPA-Enterprise / WPA2-Enterprise / WPA3-Enterprise / 802.1X

Encryption

TKIP / AES

Operating Modes

AP / Route / Mesh

Management

Cloud AC / TENEW APP (Bluetooth + Remote) / Web

Captive Portal

One-click / Account-Password / SMS / Voucher

SSID Count

Up to 8 SSIDs per radio

Max SSIDs

16 (8 per band)

VLAN Support

SSID-to-VLAN binding

User Isolation

Layer 2 isolation + Per-SSID isolation

QoS

AI traffic identification + Air-interface queue mapping

Load Balancing

By traffic / user count / frequency band / air load

AP Location Function

Supported

DHCP Server

Supported (Route mode)

NAT

Supported (Route mode)

Operating Temperature

−10 °C to 45 °C

Operating Humidity

5% to 95% RH (non-condensing)

 

Application Scenarios

 

 

Small to Medium Offices

A typical 150-500 m² office with 30-50 employees can be served by a single TFD3C. OFDMA ensures that simultaneous video calls, file transfers, and web browsing share the available airtime efficiently without individual clients experiencing noticeable slowdowns.

 
 

Retail Stores and Cafés

Customer Wi-Fi in a boutique or café benefits from the TFD3C's captive portal support. Guests authenticate via a branded landing page with one-click login or SMS verification, while the dedicated 5 GHz band keeps point-of-sale terminals and staff devices on a separate, lower-latency SSID.

 
 

Branch Office with Cloud Management

A company with multiple branch locations deploys TFD3C units at each site. The IT team manages all APs centrally through Cloud AC, pushing SSID and security policy updates from headquarters without visiting each branch.

 
 

Mesh-Extended Coverage for Heritage Buildings

In a historic building where drilling for Ethernet runs is restricted, TFD3C units form a wireless Mesh backhaul chain. The parent AP connects to the wired network, while child APs extend coverage wirelessly to upper floors or adjacent rooms.

 

 

Hot Tags: small business wifi access point, China small business wifi access point suppliers

Send Inquiry